Additional Features; Enhanced Call Forwarding - Mitel Panther II 820 System Manual

Panther II 820/1032/2064-297
Additional Features
2.03 This section provides descriptions and programming instructions for the additional
features that are available with Feature Module IV software.
Enhanced Call Forwarding
In addition to forwarding internal ringing calls and certain transfer ringing calls, Feature
Module IV software provides call forwarding of
l
Incoming external ringing calls, and
l
Internal DISA ringing calls
TO PROGRAM CALL FORWARDING AT A PANTHER SET
(See Note Below):
Step 1 Dial *# to enter programming mode.
Step 2 Dial one of the following 2-digit Call Forwarding codes:
21 for Follow Me
(forwards internal ringing, transfer ringing, external ringing and internal DISA
Iinging calls)
22 for Call Forward Busy
(forwards internal ringing, transfer ringing, external ringing and internal DISA
ringing calls)
23 for Call Forward No Answer
(forwards internal ringing, external ringing and internal DISA ringing calls)
24 for Call Forward Busy/No Answer
(forwards internal ringing, external ringing and internal DISA ringing calls)
Step 3 Dial the 2-digit number (10 to 73) of the station where you want the calls for-
warded to.
Step 4 Dial * to exit progratrnning mode.
Call Forwarding is now activated at the set.
TO TURN CALL FORWARDING OFF:
Step 1 Dial *# to enter programming mode.
Step 2 Dial 20
Step 3 Dial * to exit programming mode. -
NOTE: For instructions on programming an ONS port with Call Forwarding, refer to section
5.02.
Feature Module IV & On Premise Station Unit
Page 5