Mitel Panther II 820 System Manual page 166

Trillium Standard Practice
INTERCOM ON HOLD:
Defmes whether or not the system is set
up for Intercom on Hold capability. This feature allows an internal call
to be placed on hold.
Preprogrammed Value = No Intercom on Hold capability.
TRANSFER RINGING TIME:
Defines the length of time an
unanswered set will ring before returning to the set defined by the
Transfer Ringing Return feature. Available values are: 10 seconds, 20
seconds, 30 seconds, 45 seconds, 60 seconds, or 90 seconds, or the
system can be programmed to ring indefinitely until the call is
answered.
Preprogrammed Value = 30 seconds.
FORCED/MANUAL ACCOUNT CODE DIGITS:
Defines the
number of digits that will be required by the system for a forced or
manual account code. The number of digits can be 4,6, or 8.
NOTE:
If the
Toll Security feature will be used, it is recommended that the
ForceaYManuai Account Co& Digits parameter be left at the preprogrammed value.
Preprogrammed Value = 6 digits.
EXECUTIVE OVERRIDE TONE:
Defines whether or not a tone
will be heard before a user with Executive Override capability can enter
a call in progress.
Preprogrammed Value = Yes.
TIME DISPLAY:
This feature defines whether system time will be
displayed using a 12-hour or 24hour clock.
NOTE: System DateiTime is set from the Master Attendant Station. Refer to the
Panther II Display Set User Guide (Attendant Console section), for instructions.
Preprogrammed Value = 1Zhour clock.
CALL FORWARDING TIME:
Defines the length of time that a set
will ring before the Internal Call Forwarding - No Answer feature will
be applied. Length of time can be 5 seconds, 10 seconds, 20 seconds
or 30 seconds.
Preprogrammed Value = 10 seconds.
Programming
Page 6