Mitel Panther II 820 System Manual page 184

TrilIium Standard Practice
Tenanting
2.14
The Tenanting Parameters, including Access Codes and Data Codes are
provided in Table 2-8. Refer to
Panther II 820/1032/2064-105, Features and Services
for more details. They are:
TENANT TYPE: This programming is completed in conjunction
with Flexible Ringing Assignment, Private/Non-Private Tenanting,
Tenant Group and Tenant Group Assignment. It allows you to choose
one of four possible line group types:
Type A - Sets assigned to this line group can only make and answer
tails on the lines within the same tenant group.
Type B - Sets assigned to this line group can make and answer calls
on lines within the same tenant group, and can also answer incoming
calls ringing in another group.
Type C - Sets assigned to this group can make and answer calls on
lines within the same tenant group, and can also receive calls
transferred from other groups.
Type D - Sets assigned to this group have no restrictions. Includes
the features of Types A, B and C.
Preprogrammed Value = Type A.
PRIVATE I NON-PRIVATE INTERNAL TENANTING:
Tenants in Private Mode can access (by an intercom call), only those
stations within their own tenant group, whereas tenants in Non-Private
Mode can access all other tenants.
Note: It is recommended that Private Mode be selected in situations where two or
more separate groups of users are sharing the Panther II sysrem (e.g., two or more
businesses in the same building). If all users of the Panther II system are within the
same company, but you wish to separate users into four groups for Intercom
Tenanting or Station Hunting (Code 124YY), select Non-Private Mode. The
selection of Non-Private Mode will allow the groups to communicate with each
other. If Intercom Tenanting or Station Hunting will not be used, leave tht sys:em
in Private Mode, as Code 124YS is preprogrammed with all users in Group 1.
Preprogmmmed Value = Private Mode.
Programming
Page 24