Introduction; General; Reason For Issue; Feature Module Iv Software - Mitel Panther II 820 System Manual

Panther II 820/1032/2064-297
1. INTRODUCTION
General
1.01
This Practice provides instructions for installing and programming Panther II 820/
1032/2064 Systems with Feature Module IV software and the On Premise Station Unit.
Reason Far Issue
1.02 This is the first issue of this Practice. It is one of the set of Practices written to assist
a craftsperson install, operate and maintain the system in the field.
2. FEATURE MODULE IV SOFTWARE
General
2.01 In addition to providing the Panther II features outlined in the
Feature & Services
Practice
of the
Panther II System Manual,
Feature Module IV software provides Panther II
820/1032/2064 Systems with the following:
enhanced Call Forwarding,
improved extension displays,
displays for Transfer Ringing to the attendant, and
a change in the default setting of the Loud Bell Ringing/Ringing Over Paging feature
Feature Module IV software provides displays in English only.
Installation
2.02 The Feature Module IV Cartridge plugs into a port on Panther II 820 or 1032 Key
Service Units. If you' re installing the system for the fmt time follow the procedure out-
lined under the sub-heading
Initial Installation;
if you' re replacing the Feature Module
Cartridge in an existing installation follow the procedure given under the sub-heading
Replacing the Feature Module Cartridge.
CAUTION: Follow the
instructions
carefully. If you don' t install the Feature Module IV
Cartridge correctly, you could damage the software on the Feature Module IV Cartridge,
or worse, damage the software in the Key Service Unit (KSU).
Feature Module IV & On Premise Station Unit
Page 1