Mitel Panther II 820 System Manual page 144

Panther II 820/1032/2064-105
l
Access to stations through a DSS key will be affected by INTERCOM
TENANTING (see
Section 4).
l
Only
one DSS key can be programmed as a particular station.
Programming Required
Programming of DSS keys is completed by the System Manager at each
individual Set.
PROGRAMA4ABLE FEATURE KEYS
Description
Any line or DSS key located above the feature keys (on a Panther Set's
designation card) can be programmed as a Feature key to perform 10 special
"one-touch" functions.
The System Manager must follow the procedure outlined in the
PROGRAMMABLE KEYS section of
Panther II 820/1032/2064-20.5,
Programming
using the following access codes:
Dial Access Code
To Program a Key to be...
050 Saved Number Redial
057 Call Pickup - Local
058 Call Pickup - Remote
059 Night Pickup
060 Do Not Disturb
061 Program
Conditions
If
a
key is used to perform any of the special functions listed above, the
key's functioning is still subject to the constraints of the feature itself; e.g.,
if a key is desired for Do Not Disturb, Access Code 060 (Do Not Disturb
Capability) must be enabled for the set.
Programming Required
Programming of Feature keys is done by the System Manager at each
individual Set.
PROGRAMMABLE USER NAMES
Description
This feature allows the Master Attendant (preprogrammed as Station 10) to
enter an S-character name for each station user (instead of the user's station
Features and Services
Page 51