Mitel Panther II 820 System Manual page 209

Panther II 820/1032/2064-205
TABLE 2-18 (a) Prime Line Group Assignment
General by Station
2.2 4 The Group Parameters, including Access Codes and Data Codes are provided in
Tables 2-19 and 2-20. The parameters are:
TENANT GROUPS: (Table 2-19) After the 8 lines on the
Panther II 820 system, or the 10 lines on the Panther II 1032 system,
or the 20 lines on the Panther II 2064 system have been assigned to the
15 Tenant groups (see GROUP PROGRAMMING - General by Line),
each station must be assigned to one of the 15 groups.
Note:
If two
businesses are sharing a system and Private Mode was
selected in Tenanting parameters, the stations available to each business
should be placed in separate tenant groups.
Preprogrammed Value = No Tenant Groups.
Programming
Page 49