Mitel Panther II 820 System Manual page 141

Trillium Standard Practice
Conditions
. Preprogrammed messages can be left by any station user, but will only
be seen by those users who have a Panther II Display Set.
-'
.i
Programming Required
l
Access codes (shown above) must be dialed from the Set which wishes to
leave the message.
PRIME LINE SELECT I PRIME LINE PREFERENCE
Description
This feature allows an individual station to have one specific line (01 to 20)
designated as their Prime Line. This line would be accessed automatically
when the user dials 9, or (if Auto Line Select is programmed for the Set)
goes off-hook or presses the SPEAKER key.
Prime Line Select should be pre-planned/assigned by the System Manager.
Each of the lines in the system are put into one of fifteen Prime Lime
Groups. A line can be in more than one Prime Line Group. Then each of
the stations which will be using this feature, are placed in one of the fifteen
Prime Line Groups.
The choice of a Prime Line should take into account which lines each user
has access to, and which lines will not conflict with other users in the
system. Then, in order to program Prime Line at a Set, a System Manager
will enter the appropriate 2-d@ Prime Line Access Code; either 00 for last
line, or 01 to 20 for a specific line on the system. This allows simple,
automatic access to the designated line for all outgoing calls.
Conditions
l
If Prime Line Select is not programmed for a Set, when the user dials 9,
goes off-hook or presses the SPEAKER key, the last line that they used
will be selected.
l
If the last line and Prime Line are both busy, the next available line that
the user has access to, will be selected.
Programming Required
l
Access Code 202 - Prime Line Groups (to put lines into one of 15 Prime
Line Groups)
l
Access Code 123 - Prime Line Preference (to put stations into Prime Line
Groups)
PRIVATE SPEED CALL - DIALING
Description
The Private Speed Call - Dialing feature allows the user to speed dial one of
/:
.
Features and
Services
Page
48
.