Mitel Panther II 820 System Manual page 199

Panther II 820/1032/2064-205
Step 5.
After the inputted data is displayed, press the
HOLD
key to
increment to the next line.
Step 6. Repeat Steps 4 and 5 for each line assignment at that station.
When the last line assignment has been entered:
.
Press
the
HOLD
key to increment to the next station number,
OR
.
Press #
to store all previous data or dial a new access code.
Step 7. Press the * key to exit programming when all selections have
been made. The new programming is complete.
-
Programming
Page 39