Mitel Panther II 820 System Manual page 62

Panther II 820/1032/2064-296
14.75" (37.46 cm)
275"
5% Crr
1 = 7.7" (19.6
cm) 4
1.5"
(3.76 cm)
Figure 3-l Mounting the Options Interface Hardware Unit
Step 7. Plug one end of the supplied ribbon cable into the port that you uncovered in
Step 6. Refer to Figure 3-3 to locate the correct port on the KSU. The connec-
tor fits into the port only one way. Don' t attempt to force the connector into the
port.
Step 8. Plug the other end of the ribbon cable into the port on the left panel of the
Options Interface Hardware Unit.
Step 9 Plug in the KSU power cord.
Feature Module II & Options Interface Hardware
Page 13