Mitel Panther II 820 System Manual page 198

Trillium Standard Practice
\.
FLEXIBLE RINGING
ASSIGNMENT:
j
2.19
After filling in your Flexible Ringing Assignment selections in:
.
Table 2- 12 (if you are connecting a Panther II 820 System),
.
Table 2-13 - for the first 10 lines/32 stations (if you are
connecting a Panther II 1032 System),
OR
. Table 2-,r3 and Table 2-14 (if you are connecting a Panther II
2064 System),
Step 1.
Step 2.
At Station 10 (using a Panther II Display Set), dial * # 0
1 5.
Dial
119YY
(where YY is a 2-digit station number from 10 to
73).
Step 3.
Step 4.
Dial XX (where XX is a 2-digit line number from 01 to 20).
Dial the digit 0, if you do not want the selected line to ring at
the selected station,
OR
Dial the digit
1,
if you want the selected line to ring at the
'selected
station.
,
Note: Only Station IO is preprogrammed to ring during an incoming tail on all
-lines.
Programming
Page
38