Mitel Panther II 820 System Manual page 121

Trillium Standard Practice
5.
STATION FEATURES
ACCOUNT CODES (FORCED AND MANUAL)
Description
There are two types of Account Codes available on the Panther II system,
Forced and Manual. Both are used to bill calls to an account, but in the case
of Forced Account Codes, the user must supply the account number before
being given access to an outside line. Manual Account Codes can be
entered at any time before a call is ended.
Before you can access an outside line you must enter a Forced Account
Code. After you enter the Forced Account Code, you will automatically be
given access to an outside line. If your set has been programmed with a
Forced Account Code, and you press a line key, a line pool key or dial 9,
without entering the security code you will not obtain dial tone and the line
LED will not turn on.
Each station is programmed to accommodate Manual or Forced Account
Codes on a set-by-set basis. Account Codes can be any 4 -, 6- or g-digit
number, dependent on programming. In default, 6-d.@ Account Codes are
used. Codes 000000 to 999999 can be entered to allow l,OOO,OOO
possible combinations. When more are required, # and * can be used; e.g., *#99.
An Account Code can be programmed to appear (on a systemwide basis) on
the far right field of the SMDR printout immediately following the call
information. It will be preceded by the letter "A", such as A123456.
Conditions
l
Each Set can use Forced or Manual Account Codes, but not both.
l
If a Panther II system is set up with both Station Security and Forced
Account Codes enabled at a Set simultaneously, the user must dial the
Station Security Code frst, followed by the Forced Account Code, in order
to obtain an outside line.
l
Account Code Printout must be programmed for the system before
Account Codes can be used.
l
Account Codes cannot be stored in a Saved Number Redial key, a Redial
key or speed dial keys.
Programming Required
l
Access Code 021- Forced/Manual Account Code Digits
l
Access Code 007 - Account Code Printout
l
Access Code 1.07 - Account Code Type
ALARM REMINDERS
Description
Users can program an alarm to sound through their Set' s speaker on a one-
Features and Services
Page 28