Mitel Panther II 820 System Manual page 193

Panther II 820/1032/2064-205
MANUAL / AUTO INTERCOM / AUTO 'LINE SELECT:
Determines whether the Intercom Line is selected automatically, or a
C.O. Line is selected automatically or whether the selection must be
made manually when the handset is lifted.
Preprogrammed Value = Auto Intercom Line.
HANDSET / HEADSET COMPATIBLE: Allows either a
handset or headset to be used at each station.
Preprogrammed Value = Handset.
BLOCK PROGRAMMING: Allows the programming selections
for a station to be automatically copied to a block of other stations.
Preprogrammed Value = Not applicable.
FLEXIBLE RINGING ASSIGNMENT: Used to program
ringing for each station (10 - 73). Except for Station 10, each station is
preprogrammed NOT to ring during an incoming call on any line.
Ringing must be programmed for a line to ring at a station. When the
Door Answer Option is connected, Line 8 on the Panther II 820
system, Line 10 on the Panther II 1032 system, and Line 20 (for use
with a second DAU) on the Panther II 2064 system must also be
programmed to ring at the desired stations.
Fill in Tables 2-12 to 2-14
for this feature.
Programming
Page 33