Table of Contents
Advertisement
Trillium Standard Practice
Line Pool
:
:
Access
Code
:::
403
404
Pressing a line pool key will select the first available line in the pool. If
none of the lines in the pool are free, the user can queue for the line pool,
using the same methods as normal line queuing. See also Section 4, LINE
POOLS.
Programmable Feature Keys allow a specific key or several keys to be
programmed as Line Pool keys (See Section 5, PROGRAMMABLE C.O.
LINES for more details).
Conditions
l
Line Pools must be set up in System Programming.
Programming
Required
l
None
LINE
QUEUING
Description
This feature gives you the ability to reserve a line for use when the line
becomes available. You can queue for any available line in your line group,
or queue for a specific line (or pool of lines).
You are automatically placed in queue for the line when you:
l
dial 3 and the number of a busy line,
l
press a busy line key, or
l
dial 9 when all lines are busy.
If a prime line is programmed for your set, when you dial 9 you will be
queued for your prime line only.
You will hear one burst of tone confirming that you have been placed in
queue. When the queued line becomes free, you will hear bursts of tone
every second for 5 seconds.
To cancel the queue, simply press the
FLASH/CANCEL key while on hook.
Conditions
l
None
Programming
Required
None
Features and Services
Page 42
Advertisement
Chapters
Table of Contents
