Mitel Panther II 820 System Manual page 138

Panther II 820/1032/2064-105
Programmable Feature Keys allow a specific key to be programmed as a
Night Pickup key (See PROGRAMMABLE FEATURE KEYS in this
Section for more details).
Conditions
A Set programmed to have the ringing line appear, can also answer the
call by pressing the appropriate line key.
The ringing call of lowest numbered line will be picked up first.
The first user to dial the Night Pickup code (or press the appropriate line
key), will answer the call.
Programming
None
Required
OFF-HOOK VOICE ANNOUNCE
Description
The Off-Hook Voice Announce feature uses two consecutive station ports in
the system. For example, if a Panther II Display Set using Off-Hook Voice
Announce is connected at Station 13, then Station 14's voice pair must be
reserved for Off-Hook Voice Announce wiring; Station 14 cannot be used
as a regular station.
Off-Hook Voice Announce allows the Display Set user who is busy on an
off-hook call, to be contacted through their Set's speaker at any time during
the call. The Off-Hook Voice Announcement will be preceded by a tone.
To avoid Off-Hook Voice Announce interruptions, the Display Set user
must use their Set handsfree.
When the Off-Hook Voice Announcement is initiated (by code), a handsfree
conversation can take place.
Conditions
Off-Hook Voice Announce is available-through a Panther II Display Set
only, exept during intercom call.
The maximum number of Off-Hook Voice Announce ports is limited by
the number of ports in the system and the number of Panther II Display
Sets used.
A 6-conductor cable and jack is required for each station that will be using
the Off-Hook Voice Announce feature.
A Panther II Display Set can be accompanied by either Off-Hook Voice
Announce, or a DSS/BLF Console, but not both.
Programming Required
l
Access Code 100 - Type of Set programming
Features and
Services
Page
45