Mitel Panther II 820 System Manual page 213

Panther II 820/1032/2064-205
NOTE:
Intercom Tenanting capability will be affected by TENANT TYPE
programming.
Preprogrammed Value = All users in Group 1.
NIGHT TRANSFER STATION GROUPS: (Table 2-20)
After the lines have been assigned to the four NIGHT TRANSFER
LINE GROUPS (see GROUP PROGRAMMING - General by Line),
each station must be assigned to one of the four groups.
Preprogrammed Value = No Night Transfer Station Groups.
TABLE 2-20
GROUP PARAMETERS BY STATION
Feature Access Condition Data
Description Code (Values) Code
Night Transfer 1OlYY No Ringing* 0
Station Groups Group 1 1 C-
Group 2 2
Group 3 3
Group 4
4
____________________~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Intercom Tenanting/ 124YY Group l* 0
Station Hunt Groups Group 2
Group 3 :
Notes:
l
denotes preprogrammed value
YY= a station number from 10 to 29 on the Panther lI 820 system, or 10 to 41 on the Panther II
1032 system, or 10 to 73 on the Panther II 2064 system.
To program these access codes, you will
need to enter each station number that needs to be changed from the preprogrammed value (one at a
time).
Programming
Page 53