Table of Contents
Advertisement
Panther
II 820/1032/2064-105
only those features that were initialized by a user, Private Speed Call
numbers or features that were set
UD
in Svstem Pro!zramming: will not be
affected.
NOTE: This feature is not to be confused with System Clear.
Conditions
l
This capability is only available to the Master Attendant station
(preprogrammed
as Station 10).
Programming
Required
None
STATION
TO STATION
CALLING
Description
Station to Station calling can be done by accessing internal dial tone and
pressing the desired Direct Station Selection key. If a Set does not have a
DSS key, the intercom is selected and the 2-d@
station number is dialed.
Conditions
l
In order for a Set to have station-to-station
calling capability through DSS
keys, a DSS key must be programmed
for the station using the
PROGRAMMABLE
DSS/SPEED
programming
methods described in
Panther II 82OlIO32/2064-205,
Programmirg.
l
This feature can be affected by INTERCOM
TENANTING
(see Section
4).
Programming
Required
Programming
of DSS keys is done by the System Manager at an individual
Set.
TRANSFER
OF MASTER
ATTENDANT
CAPABILITY
Description
The
Master Attendant can transfer their capabilities to any other Set in the
system (e.g., to a sub-attendant
during a lunch hour). Refer to Section 4,
FLEXIBLE
MASTER STATION NUMBERING
for a list of Attendant
capabilities.
When the Master Attendant returns, another code can be dialed
from the new Master Attendant Set to return Attendant functionality.
Conditions
l
Only the Master Attendant (designated during system programming)
can
perform this feature.
l
The station that you transfer the Master Attendant capabilities to, should
be assigned with the same lines as the original Master Attendant Set.
Programming
Required
Programming
of this feature is done from the Master Attendant station
(preprogrammed
as Station 10).
Features and Services
Page 53
Advertisement
Chapters
Table of Contents
