Mitel Panther II 820 System Manual page 66

Panther II 820/1032/2064-296
Step 4. Dial the data code of your selection:
Length of Time Data Code
0 m@es (No Trunk ' 9 Trunk Conferencing)
0
: IIIXIIE; (default semng)
;
10 minutes 3
Step 5. Dial # to store your selection. The Intercom indicator lamp comes on steady.
Step 6 Dial * to exit programming mode.
Operation
You must establish an external conference call on amplified lines before you can set up
a Trunk to Trunk Conference:
While on an external call,
l
Press the Hold key
The call will be placed on hold and the line indicator lamp
will flash quickly.
l
Press +e key of an external line
l
Dial the desired telephone number
Afrer the called party answers,
l
Press the Conference key
l
Press the line key of the call on hold
If you hear two short bursts of tone, you have set up the conference on amplified
lines. You must be using amplified lines to set up a Trunk to Trunk Conference. If
you hear a single burst of tone, you aren' t using amplified lines and won' t be able to
set up a Trunk to Trunk Conference.
During the conference call, you can hang-up and the two external parties wiI1 re-
main connected for a preprogrammed length of time (providing the conference was
set up using amplified lines and the system is programmed for Trunk to Trunk Con-
ferencing). Before hanging up, tell the external parties that they can expect to hear
an II-second warning tone before being disconnected. Explain to them that if they
wish to continue their conversation either of them can restart the timer by dialing *
during
the tone. If neither party dials *, the call will be disconnected at the end of
the II -second tone. Note that the party that dials the * must have a tone dial set.
Before either party hangs up, one of them must dial O# to release the lines. If neither
party dials O# before hanging up, the system will automatically release the lines
when the preprogrammed time for Trunk to Trunk Conferences has expired.
You can re-enter a Trunk to Trunk Conference anytime before the preprogrammed time
period expires. To re-enter a Trunk to Trunk Conference:
Feature Module II & Options Interface Hardware
Page 17