Mitel Panther II 820 System Manual page 143

Trillium Standard Practice
PROGRAMMABLE C.O. LINES
Description
Flexible C.O. Line Programming allows increased flexibility of C.O. lines
on a set-by-set basis. Line keys can be programmed to be any possible line
or line pool available on the system; e.g., a Panther 306 Set which normally
has access to a block of three consecutive lines (e.g., Line 1,2 and 3),
couid be reprogrammed for use on a Panther II 2064 system with access to
any lines and/or line pools.
To program any key to be a specific line key (or line pool key), the System
Manager must follow the procedure outlined in the PROGRAMMABLE
KEYS section of
Panther II
820/1032/2064-205,
Programming.
Conditions
l
The Flexible C.O. Line feature is programmed from each Set, but the
System Manager must still assign the flexibility, based on the
station's FLEXIBLE RINGING ASSIGNMENT, TOLL
RESTRICIION, and TENANT TYPE.
l
The same line will be in more than one line pool, and a line can
be both a line key and line pools on individual Sets.
l
Only one key can be programmed as a particular line.
Programming Required
l
Programming of C.O. Lines is completed by the System Manager at each
individual Set.
PROGRAMUABLE DSSISPEED
Description
On Panther 306 and 612 Sets, the Direct Station Selection (DSS) keys can
be individually programmed to have any station appear on any key.
For other Panther Sets (Panther 1032,2064 and Display Sets), the
programmable keys on each Set are preprogrammed as line keys. One or
more line keys can be converted into DSS keys at each Set. To program
any key to be a specific DSS key, the System Manager must follow the
procedure outlined in the PROGRAMMABLE KEYS section of
Panther II
820/1032/2064-205,
Programming.
If
Private Speed Call numbers and Common Speed Call numbers are stored
using codes (00 - 10 and 20 - 99, respectively), codes 00 - 10 and 20 - 62
will correspond to a particular DSS key for One Touch Speed Dialing. See
the
Panther II User Guides
for more details on One Touch Speed Dialing.
Conditions
l
Refer to the conditions stated in Section 5 for PRIVATE SPEED CALL,
COMMON SPEED CALL and STATION TO STATION CALLING.
. .
Features and Services
Page
50