Mitel Panther II 820 System Manual page 118

Panther II 820/1032/2064-105
TOLL RESTRICTION BY STATION
Description
Determines which one of the six classes of Toll Restriction (see Section 4,
TOLL RESTRICTION BY LINE) will be assigned to each station. Each
station is preprogrammed with Class A Toll Restriction.
Conditions
l
Toll Restriction by Station will be affected if Forced Account Codes or
Toll Security are enabled at a Set.
Programming Required
l
Access Code 103 - Toll Restriction by Station
TOLL RESTRICTION EXCEPTION TABLES
Description
These tables define preprogrammed l- to 4-digit entries which will be
allowed or denied by the six Toll Restriction groups. After the ALLOW and
DENY tables are set up, each line (see Section 4, TOLL RESTRICTION
BY LINE) and then each station (see Section 4, TOLL RESTRICI' ION BY
STATION) is placed into one of the six possible Toll Restriction groups.
Deny Table A
is used for CLASS A' and consists of sixteen
possible I
-
to 4-digit emies.
digits 41 I, 5.55 and 976.
Preprogrammed entries include the
Deny Table B
applies to CLASS B and CLASS B' . It consists of
eight possible I- to 4-digit entries. Preprogrammed entries include
the digits 0 and I.
Allow Table B
is used for CUSS B and consists of eight
possible I-to 4-digit entries. Preprogrammed entries inch& the
digits I800 and 800.
Allow Table C
applies to CLASS C and consists of sixteen
possible I - to 4-digit entries.
digits 911.
Preprogrammed entries include the
Conditions
l
Restrictions in the Deny Tables take precedence over the exceptions in the
Allow Tables.
Programming Required
l
Access Code
0420 -
Deny Table A
l
Access Code 0421- Deny Table B
l
Access Code 0430 - Allow Table B
l
Access Code 0431 - Allow Table C
.
Features and Services
Page 25