Table of Contents
Advertisement
Panther II 820/1032/2064-296
1. INTRODUCTION
GENERAL
1.01
This Practice provides instructions for installing and programming
Panther II 820/
1032/2064 Systems with Feature Module II and Options Interface Hardware.
REASON FOR ISSUE
1.02
This is the first issue of this Practice.
It is one of the set of Practices written to
assist a craftsperson install, operate and maintain the system in the field.
2. FEATURE MODULE II SOFTWARE
GENERAL
2.01
In addition to providing the Panther II features outlined in the Feature & Services
Practice of the Panther ZZ System Manual, Feature Module II software provides
Panther II 820/1032/2064 Systems with the following:
l
additional Programmable
Feature Keys,
l
enhanced displays for Transfer Ringing Return, and
l
Remote Programming
and System Status (RPASS).
INSTALLATION
2.02
The Feature Module II Cartridge plugs into a port on Panther II 820 or 1032 Key
Service Units. If you' re installing the system for the fast time follow the procedure out-
lined under the sub-heading Initial Installation;
if ycu' re replacing the Feature Module
Cartridge in an existing installation follow the procedure given under the sub-heading
Replacing the Feature Module Cartridge.
CAUTION:
Follow the instructions carefully. If you don' t install the
Feature Module II Cartridge correctly, you could damage the software on the
Feature Module II Cartridge, or worse, damage the software in the Key Service
Unit (KSU).
Feature Module II & Options Interface Hardware
Page 1
Advertisement
Chapters
Table of Contents
