Mitel Panther II 820 System Manual page 122

Panther II 820/1032/2064-105
time basis, or to be repeated at daily or weekly intervals, to remind them of
meetings, appointments, etc. The alarm consists of six l-second bursts of
ringing. The alarm will sound if the set is idle. However, if the set is in
use the alarm will not sound until the set is returned to an idle state and the
clock turns to the next minute. In addition, the Panther II Display Set can
program a message to appear on the LCD Display for 60 seconds when the
alarm sounds (see Section 6, ALARM REMINDER MESSAGES).
Conditions
l
Only one type of (one-time, daily or weekly) can be programmed at a
time. If a second reminder is programmed, the first is cancelled.
l
There is programming verification at an LCD Set only.
Programming Required
None
ALL CALL PAGE
Description
' This feature allows a user to make voice paging announcements to all idle
stations simultaneously by dialing a code or pressing their own DSS key.
Any one of the paged stations may answer the announcement simply by
dialing the "Meet-Me Answer" code, provided that the user originating the
announcement is still on the line. The All Call Page announcement is
preceded by a double tone at all stations.
Conditions
None
Programming Required
None
BACKGROUND MUSIC
Description
If a music source is connected to the system, background music can be
activated through the speaker of each Set individually. Music will stop
temporarily during an incoming call.
Music can also be played through the external paging system (see Section 5,
MUSIC THROUGH EXTERNAL PAGE). Calls placed on hold will hear
music automatically (see Section 5, MUSIC ON HOLD).
Features and Services
Page 29