Table of Contents
Advertisement
Panther II 820/1032/2064-296
Step 8.
To confirm your programming
selections enter the first access code by dialing
OOO##. Press # to step through each access code.. The data code currently pro-
grammed for each access code will be displayed.
Press # to step to the next feature.
The access code and data code
programmed for the system are
displayed.
Step 9.
Press the * key to exit programming
and release the line. Programming
is com-
plete.
Step 10. Hang up' the handset or, if handsfree, press the Speaker key.
Operating Notes
l
If you hang up while using RPASS, the system will automatically
release the line.
The system will also release the line if you don' t press any keys for 3 minutes.
l
You can' t use the Flash/Cancel
key to delete an inputting error or use the Hold key
to increment the access code during RPASS programming.
l
The customer won' t be able to enter programming
mode from their Station 10 while
you' re using RPASS to program their system. Conversely, if the customer is in pro-
gramming mode at their Master Attendant Station, you won' t be able to enter pro-
gramming mode on their system using RPASS.
Feature Module II & Options Interface Hardware
Page 11
Advertisement
Chapters
Table of Contents
