Mitel Panther II 820 System Manual page 151

Trillium Standard Practice
. An INTERNAL conference will display the two stations that have been
added, but no timer appears. The first station used to set up the 3-party
internal conference is displayed on the top left side of the display (following
the initial "S"); the second station used to set up the 3-party conference
appears on the bottom left side (following the initial "S"), with the word
CONFERENCE shown on the right side of the bottom row.
A MIXED conference will display the line and station that have been added,
and a timer appears. The line used to set up the 3-party mixed conference
is displayed on the bottom left side of the display (following the initial "L");
the station added appears on the top left side (following the initial "S"), with
the word CONFERENCE shown on the right side of the bottom row. The
timer appears on the top right side of the display.
DIALED NUMBER DISPLAY
The LCD shows the telephone number or station number being dialed, on
the bottom row of the display. If the number of digits entered exceeds 16,
then the number will start to wrap around the display, and the additional
digits will copy over the first digits dialed. The only case where dialed
digits will not be displayed, is if the user has preprogrammed a SECURE
NUMBER DISPLAY for a Private Speed Call number. See SECURE
NUMBER DISPLAY in this Section.
DISPLAY KEY
The DISPLAY key on the Panther II Display Set is used to display calls on
hold or Messages Waiting at a Set, or to show what is stored in memory for
the Saved Number Redial, Last Number Redial or Speed Call keys.
Displaying Calls on Hold -
During normal call processing the LCD displays only the oldest call on
hold, but if more than one call is on hold and the DISPLAY key is pressed,
the LCD will show up to four calls on hold. Calls on hold are shown on the
bottom row of the LCD in order of left to right, with the leftmost line on
hold corresponding to the oldest call on hold, and the rightmost line on hold
corresponding to the newest call on hold This display will remain until the
DISPLAY key is pressed again. Once a call is taken off hold and the
DISPLAY key pressed, all the remaining calls on hold can be displayed by
pressing the HOLD key.
Features
and
Services
Page
58