Mitel Panther II 820 System Manual page 131

Trillium Standard Practice
Condition
l
-The Executive Override feature is assigned to individual Sets during
system programming. Only Sets which have the feature assigned to them
can activate the feature.
l
Only one user can 'barge into' a conversation at a time.
Programming Required
l
Access Code 026 - Executive Override Tone
l
Access Code 102 - Executive Override Capability
EXTERNAL LOUDSPEAKER PAGING
Description
This feature allows an announcement to be made through an optional
external loudspeaker (public address) system, if connected.
Conditions
l
To operate this feature, an optional external loudspeaker system must be
connected to the Panther II system.
Programming Required
None
HANDSET / HANDSFREE
Description
The Handset / Handsfree feature allows a user to switch from the handset to
handsfree operation and vice versa, at any time during a call. Handsfree
conversations are achieved by speaking in a normal voice in the direction of
the Set during handsfiee mode. To switch from handsfree to handset
operation during a call, lift the handset.
It is recommended that the handset be used instead of the microphone in
areas with excessive background noise; e.g., near an air-conditioning vent,
fan, or in open office areas.
Conditions
l
A handsfree set must be used to initiate a handsfree conversation, but
non-ha&free Sets can still have handsfree answerback on intercom (see
Section 2, PANTHER TELEPHONE SETS, for a listing of handsfree and
non-handsfree Sets, and refer to HANDSFREE ANSWERBACK below).
Features and Services
Page 38