Mitel Panther II 820 System Manual page 33

Mite1 Standard Practise
To set Call Forwarding on or off, at an ONS single-line set,
Step 1
Lift the handset
Step 2
Dial *#
Step 3
Dial one of the following codes to specify the type of call forwarding:
2lfl for Follow Me (external, internal, internal
DISA and
transfer ring calls);
22YY for
Call Forward Busy (external, internal, internal DISA and transfer ring calls);
23YY
for Call Forward No Answer (external, internal, internal DISA calls);
24YY fo,Cusy/No Answer (external, internal,
internal DISA calls); or
20 to tum Call Forwarding off.
Note: YY = the number (10 to 73) of the station where you want your calls forwarded to.
Step 4
Step 5
Dial * to exit programming.
Hang up the handset
To set Call Forwarding on or off at an ONS station that is programmed for an auto atten-
dant or voice mail system:
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9
Step 10
Step 11
Go to the Panther II Display set at station 10.
Dial *#015 to enter programming mode.
Dial access code 1OOYY (Type of Set) where YY is the ONS station number
of the voice mail system or auto attendant.
Enter data code 0 for a Panther 1032/2064 Set.
Dial * to exit programming mode.
Unplug the modular cord (that corresponds to the auto attendant or voice mail
system) from the left-hand side of the ONS Unit (see Figure 5-l).
Plug the RJ14 connector on the modular cord into a Panther II 1032/2064 Set
Dial *#
Dial one of the following cqdes to specify the type of call forwarding:
2lYY for Follow Me (external, internal, internal DISA and transfer ring calls);
22fl for Call Forward Busy (external, internal, internal DISA and transfer ring calls):
23YY for Call Forward No Answer (external, internal, internal DISA calls);
24YY for Busy/No Answer
(external, internal, internal DISA calls); or
20 to turn Call Forwarding off.
Note: YY = the number (10 to 73) of the station where you want your calls forwarded to.
Dial * to exit programming
Unplug the modular cord from the Panther 1032/2064 Set and plug it back into
the ONS station of the voice mail system or auto attendant.
Feature Module IV & On Premise Station Unit
Page 28