Mitel Panther II 820 System Manual page 167

Panther II 820/1032/2064-205
MASTER ATTENDANT NUMBER: (Use Table 2-2) Allows
any station to be programmed as the Master Attendant. The Master
Attendant is provided with access to features and services not available
at other sets. These features include:
l
Control of Common Speed Call programming
l
Night Transfer control
l
Control of music over an external paging system
l
Setting system time and date
l
Clearing Set Features
l
Setting up Toll Security
l
Programming a user's name to appear on the LCD of each
Display Set
l
Preprogrammed Transfer Ringing Return
l
Transfer of Attendant capability
l
Preprogrammed Do Not Disturb Override capability
l
Preprogrammed Relay Control
Preprogrammed Value = Station 10.
The station that you transfer the Master Attendant capabilities to, should
be assigned with the same lines as the original Master Attendant Set.
MULTIPLE ATTENDANTS: Designates one Master Attendant
and up to three stations as sub-attendants for Station Hunting, Transfer
Ringing Return capability, Dial "0" for Operator, etc.
NOTE: This code should be programmed crfrer Station Hunt Groups in
Group Programming have been set up. The sub-attendant station
numbers should be programmed as the LO WEST station number in
each Station Hunt Group.
Preprogrammed Value = Station 10 for all four groups. (No sub-
attendants)
Procedure for Programming Multiple Attendants
Step 1. Put the stations in Hunt Groups (Access Code - 124YY).
Ensure the stations that you wish to set up as Sub-Attendants
are the lowest numbered station in each group.
Step
2. Program
Mulitple Attendants (Access Codes are shown in
Figure 2-l).
Step
3. The
system can be programmed with either Private or Non-
Private Tenanting (Access Code - 054). Non-Private
Tenanting allows all stations to communicate with each
other. The preprogrammedvalue is Non-Private Tenanting.
Programming
Page 7