Mitel Panther II 820 System Manual page 147

Trillium Standard Practice
TRANSFER RINGING I TRANSFER RINGING RETURN
,! ,i
Description
The Transfer Ringing feature allows incoming external calls to be
transferred (unsupervised) to any Panther Telephone Set in the system (even
if the Set is busy). The call can be transferred simply by pressing the
FLASH/CANCEL key (if programmed as a TRANSFER key - see Section
4, FLASHKANCELKRANSFER), or by pressing the line key that the call
came in on, then dialing the 2-digit number of the station to which the call
will be transferred (or pressing the appropriate DSS key, if available). Even
if the Set is busy, when the person transferring the call hangs up, the
transferred call will be automatically camped on to the busy station for a
preprogrammed length of time (see Section 4, CAMP-ON).
If the call is not answered within a predetermined length of time
(TRANSFER RINGING TIME), the call will return as stated in Section 5,
CALLBACK.
Conditions
l
When a Set receives Transfer Ringing, the user can pick up the handset or
press the SPEAKER key and be automatically connected to the transferred
caller.
Programming Required
Some or all of the following programming codes may be used:
l
Access Code 050 - Camp-On Duration
l
Access Code 051- Camp-On Tone Interval
l
Access Code 104 - Transfer Ringing Return
l
Access Code 005 - Flash / Cancel / Transfer
l
Access Code 017 - Transfer Ringing Time
ZONE PAGING
Description
Paging announcements can be made to a group of Sets which have been
programmed into a specific paging zone (see Section 4, ZONE PAGING
GROUPS). By dialing the corresponding paging number from 8 1 to 95, an
announcement can be made to a specific zone or to all zones simultaneously.
Conditions
l
A station can be put in more than one zone paging group.
Programming Required
l
Access Code 122 - Zone Paging Groups
Features and Services
Page 54