Mitel Panther II 820 System Manual page 38

Panther
II 820/1032/2064-297
Programming Voice Mailbox Numbers
Each Panther station that requires a voice mailbox, requires a mailbox number. The
mailbox number, which can be from one to three digits in length (i.e., 0 to 999), is pro-
grammed into the ONS Unit. The mailbox numbers are determined by the voice mail
system and you must refer to the manufacturer' s documentation to determine what they
can be. The voice mailbox numbers for the stations default to the Panther Station number
(e.g., Panther Station 12 is preprogrammed with the voice mailbox number 12).
To program voice mailbox numbers into the Panther system:
Step 1 Press the Speed key on the Panther II Display Set at the Master Attendant
Station. The Intercom indicator lamp begins winking.
Step 2 Enter the WY where YY is the desired station number. The selected station
number is shown in the display. For example, if you dial #12 the display
appears as follows:
Display Set LCD
Step 3 Enter the desired voice mailbox number (0 to 999). The display shows the
mailbox number as you enter it. For example, if you dial 02 the display will
appear as follows:
Display Set LCD
Step 4 Repeat steps 1 to 3 for each station that you wish to program with a voice
mailbox.
Step 5 Press the Speaker key. The Intercom indicator lamp turns off. The display
returns to showing the date and time.
Feature Module IV & On Premise Station Unit
Page 33