Mitel Panther II 820 System Manual page 126

Panther II 820/1032/2064-105
Programmable Feature Keys allow a specific key to be programmed as a
Call Pickup - Remote key (See Section 5, PROGRAMMABLE FEATURE
KEYS for more details).
Conditions
l
If more than one station attempts to pick up a ringing line at the same
time, the call will be answered by the first person who dials the Call
Pickup - Remote code.
l
Call Pickup priorities are the same as Call Pickup - Local priorities. The
oldest (fmt) ringing call of each type will be answered first.
Programming Required
None
CALLING THE ATTENDANT
Description
The Set which is installed at the master station position, can be called simply
by dialing 0 on an intercom path. The master station position is
preprogrammed to be station number 10 but may be programmed for any
other station number (see Section 4, FLEXIBLE MASTER STATION
PROGRAMMING). If multiple attendants (sub-attendants) are
programmed, dialing the digit 0 will call that Set's sub-attendant.
Conditions
None
Programming Required
l
Access Code 053 - Flexible Master Station Programming
l
Access Codes 0370,0371,0372,0373 - Multiple Attendants
CALL TRANSFER - VOICE
Description
The Call Transfer - Voice feature allows you to transfer an outside call by
pressing the HOLD key (to put the call on hold), making a paging
announcement to the desired station, and then informing the person at the
station which line the call is on. The person at the station picks up the call
by simply pressing the appropriate line key.
Conditions
None
Programming Required
None
Features and Services
Page 33