Mitel Panther II 820 System Manual page 172

Trillium Standard Practice
TABLE 2-l(a)
SYSTEM CLEAR
To perform a System Clear:
CAUTION: This procedure will RESET all system programming to its
preprogrammed
value,
and should therefore be used with extreme discretion.
System
Clear
Option Selected
During System
Programming
(Access Code 070)
To perform,
dial the
appropriate
code from
Station 10
(Programming
Station)
Result
Clear ALL Features
0700#
All previous system
programming will be
cleared, and the system
will reset to its
preprogrammed values.
Clear ALL Common
Speed Dial Numbers
0701#
All previously-programmed
Common Speed Dial numbers
will be cleared automatically.
Clear ALL Private
Speed Dial Numbers
0702#
Private Speed Dial
numbers programmed at
all Sets will be cleared
automatically.
NOTE:
A System Clear can ONLY be performed for the System Clear Option that was selected in
Table 2-1 (using Access Code 070). For example, if the Panther II System was programmed to "Clear
ALL Private Speed Dial Numbers", the Programmer/System Manager cannot go to Station 10 and dial
07W (the code for "Clear ALL Fcamres").
TABLE 2-2 FLEXIBLE MASTER STATION PROGRAMMING
Feature Description
Access Code
____________________~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
________________~___~~~~~~~~
Master Station Number 053yY
~___________________~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
____________________------
Station 10 Is preprogrammed as the Master Statlon.
YY=
a station number from 10 to 29 on the Panther II 820 system, or 10 to 41 on the Panther
II 1032 system, or 10 to 73 on the Panther II 2064 system.
Programming
Page 12