Mitel Panther II 820 System Manual page 20

Panther II 820/1032/2064-297
c. Dial access code 1OOYY where YY is the 2-digit station number of the ONS
device
d. Enter the desired data code:
5 for a single line set,
6 for a voice mail system, or
7 for an auto attendant
e. Press the # key to store your selection
f.
Repeat steps c to e for each ONS station
g. Press * to exit programming mode
KSU
KRONE BLOCK
ODULAR CONNECTOR
STANDARD SET
Figure 3-2: On Premise Unit Installation
Feature Module Iv & On Premise Station Unit
Page 15