Mitel Panther II 820 System Manual page 195

Panther II 820/1032/2064-205
TABLE 2-11 (Cont'd)
STATION PARAMETERS
Feature Access Condition
Data
Description Code
(Values) Code
Manual Select /Auto 113YY
Automatic Intercom*
Intercom/Auto C.O.
Automatic CO.
.&i
,
Manual
Select 2
+-&70~
____________________~~~~~~~~~~~~~~~~~~~~~_~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~_~~~_~_
Handset / 115YY Handset*
0
Headset
Headset 1
-___________________~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Block 118AA
MMNN
Programming
Notes: *
denotes preprogrammed value
W= a station number from 10 to 29 on the Panther II 820 system, or 10 to 41 on the Panther II 1032 system, or
10 to 73 on the Panther II 2064 system. To program these access codes. you will need to enter each station
number that needs to be changed from the preprogrammed value (one at a time).
BLOCK PROGRAMMING -
AA= the 2-digit number of a station whose programming characteristics you would
like to copy to a block of other stations.
MM= the 2-digit number of a station that is the start of the block of stations you will
copy to.
NN = the 2-digit number of the station that is the end of the block of stations you will
copy to.
FOR EXAMPLE:
To copy the programmed characteristics of Station 12 to a block
of stations (Stations 25 through 36 inclusive), dial the digits: 118122536.
Programming
Page 35