Mitel Panther II 820 System Manual page 189

Panther II 820/1032/2064-205
Outgoing data appears on the printout as follows:
07/23 03:22P 00:02:24 014 000 16135922550 TOO1 Al234
I
I
I
Line used
Account Code
Telephone # dialed T stands for trunk
I
'Not Used for outgoing calls
Station that placed the call
Call Length - Seconds
>all length - Minutes (
Call length
-
Hours
PM time
-
no designation for AM
-ime of day
-
Minutes
IIme of day
-
Hours
Jay of Month
nonth of year
Using the SMDR Printout to Verify Data and Check Speed Calls
2.17
While the
following program is running, the system is not operational. The
following program must be performed from Station 10.
1.
2.
3.
OR
OR
OR
OR
At Station 10, press the PROGRAM Key (or dial * #), then dial 0 1 5.
The Intercom LED will turn on.
Dial 9 8 7. The Intercom LED will flash very quickly.
Thendial- '_
900 to print out the programmed condition for every
condition/feature found in the programming charts.
90
1
to
print out all private speed call numbers for ALL stations.
902 to print out all common speed call numbers.
903 to print out the 900,901 and 902 options at once.
*
1
910 - 973 to print out the private speed call numbers for one
specific station (Station 10 - 73).
NOTE: Only one co& can be printed out at a time.
Intercom LED on station IO willflash slowly.
Once printing commences, the
Programming
Page 29