Mitel Panther II 820 System Manual page 210

Trillium Standard Practice
-\
TABLE 2-18 (b)
Prime Line Group Assignment
4
::
,;
PICKUP GROUPS: (Table 2-19) In
order to perform the Call
Pickup-Local feature on the Panther II system, each station must be
assigned to at least one of the ftiteen 2-digit pickup groups (01 to 16).
The pickup groups should be organized so that stations in close
physical proximity to each other are placed in the same pickup group.
Preprogrammed Value = All stations are placed in Pickup Group 01.
PRIME LINE PREFERENCE: (Table 2-19)
If the lines have
been assigned to the 15 Prime Line groups (using the GROUP
PROGRAMMING - General by Line method), each station must be
assigned to one of the 15 groups.
Note: It is recommended that each Panther II Set (Basic Set) be set up with its
own individual Prime Line for eary call processing. Other users, such as those
users with Panther II Display Sets may wish to have a Prime Line, but the System
Manager must set up this capability from the individual's Set (using the procedure
outlined in Subsection 3).
Preprogrammed Value = No Prime Line Preference groups.
Programming
Page 50