Mitel Panther II 820 System Manual page 56

Electronic key telephone system
Table of Contents

Advertisement

Panther
II 820/1032/2064-296
Transfer Ringing Return Displays
Feature Module II software provides displays for the Transfer Ringing Return feature.
When an incoming external call is transferred to another station, if the call isn' t answered
within a programmable
time period the call will either:
l
return to the station that transferred the call, then be sent to the Master Attendant
Station (or sub-attendant,
if sub-attendants
are programmed),
l
be sent directly to the Master Attendant Station (or sub-attendant,
if sub-attendants
are
programmed),
or
l
not be returned (i.e., ring at the station that the call was transferred to, until the call is
answered >.
For the first transferred call that is returned, the liquid crystal display on a Panther II
Display Set will identify the station that the call is being returned from, and the line that
the call is on.
Programming
The callback destinations
are programmed
individually for each station using Transfer
Ringing Return. The length of time that the call will ring at an unanswered set before
being returned is programmed
using Transfer Ringing Time. Refer to the Programming
Practice in the Panther II System Manual for instructions on how to program these para-
meters. The default settings for these parameters are as follows:
Transfer Ringing Return - returns call to the station that initially transferred the call,
then sends the call to the Master Attendant Station.
Transfer Ringing Time -
30 seconds.
Operation
If a transferred call is returned to a Panther II Display set, the liquid crystal display will
show:
l
the number of the station that the call is being returned from, and
l
the line number of the call.
Example:
Feature
Module II & Options
Interface
Hardware
Page 7

Advertisement

Table of Contents
loading

Table of Contents