Mitel Panther II 820 System Manual page 149

Trillikn Standard Practice
CALLING PARTY IDENTIFICATION
. .
.-i .I
2'
When an external call is ringing at a Display Set, the LCD shows the date
and time in the top row and the number of the ringing line in the bottom
row.
Example:
5/04 THU Ii:15
RfNGlilG 2
When another station in the system calls a Display Set, the LCD on the
Display Set shows the date and time in the top row and the station that is
calling in the bottom row. If the caller's name has been programmed into
the system, it will appear instead of the station.
Example:
304 THU II:20
CALL FM Ext. 12
5/04 THU
11:25
CALL FM TONY
When you place an internal call from a Display Set, the LCD will show
you the type of call on the top row - either CALLING VOICE, CALLING
TONE or CALLING B.O.T. (which stands .for Busy Override Tone).The
station number of the set you're calling will be shown on the left-hand
side of the bottom row following the initial "S", and the caller's name
(if programmed) will be shown on the right-hand side of the bottom row.
CALL TIMER DISPLAY
The timer on the LCD starts for each external connection as soon as the
system clock starts timing the duration of the call. The duration of a call,
conference, line on hold, etc., appears in the form of 0O:OO (minutes and
seconds) and is always shown on the top right of the display. The timer
updates itself every 5 seconds.
Features and Services
Page 56