Mitel Panther II 820 System Manual page 197

Panther II 820/1032/2064-205
PROCEDURE 2 - TO SECURE A STATION
NOTE: The following procedure must be completed twice for each station; once for
Night Mode and once for Day Mode:
1.
2.
3.
At Station 10, press the PROGRAM key (or dial * #) to enter Programming
Mode.
Dial the digits 0 9.
Dial the 2-digit station number (10 to 73). Then,
4. (A) TO ENABLE STATION SECURITY DURING DAY MODE, dial
l
0 1 - Security Code Required
Vor LOW level and NIGHT level
privileges)
l
0 0 -
CSecurity Code Required
(for DAY level and HIGH level privileges)*
OR
(B) TO ENABLE STATION SECURITY DURING NIGHT MODE, dial
l
!
1 -
Security Code Required
Cfor LOW level and DAY level privileges)
l
10 - No Secuzy Code Required
(for NIGHT and HIGH level privileges).*
5.
Press the * key to exit programming.
Notes: * denotes preprogrammed value
Programming
Page 37