Mitel Panther II 820 System Manual page 145

Trillium Standard Practice
number) which will be displayed on all Panther II Display Sets in the
system during call processing. For example, if Mary (at Station 15) calls a
Panther II Display Set at Station 24, the LCD at Station 24 will read "CALL
FM MARY" instead of "CALL FM Ext. 15".
,,'
Conditions
l
A maximum of 8 characters per name are allowed.
l
Only the Master Attendant station can perform this feature.
l
The user name designated for each Set will remain activated until it is
overwritten with another user name.
Programming Required
Programmming is completed from the Master Attendant Station
(preprogrammed as Station 10).
SAVED NUMBER REDIAL
Description
Any telephone number that is dialed can be saved for repeated short-term
use. The telephone number will be stored until another number is saved.
The number can be stored using one of the following methods:
1.
2.
3.
After hanging up from a call, the user can press the SPEED key,
press *
,
and then press the SPEAKER key.
After hanging up from a call, the user can press the key that is
designated as a SAVED NUMBER REDIAL key (see Section 5,
PROGRAMMABLE FEATURE KEYS).
On the Panther II Display Set ONLY - After hanging up from a
call, the user can press the S/N REDIAL key.
Cbnditions
l
Up to 26 digits can be stored in the Saved Number Redial location.
Programming Required
None
SET FEATURE CLEAR
Description
This capability allows the Master Attendant (preprogrammed as Station 10)
to dial a code which will cancel currently-activated programming for Set
features such as Internal Call Forwarding and Do Not Disturb for a specific
Set, or for all Sets in the system simultaneously. This feature will clear
Features and Services
Page 52