Mitel Panther II 820 System Manual page 55

Trillium Standard Practice
.
J .:.i
_:'
,
Programming
Feature keys are programmed at each individual set. To program a line/DSS key to
activate a feature:
Step 1.
Dial *# (or press the Program key) at the set.
Step 2.
Dial the digit 4.
Step 3.
Press the line/DSS key that you wish to program. Remember, you can only
program line/DSS keys that are located on the set' s designation card.
Step 4. Dial the code of the desired feature (e.g., dial 063 to program the key to
activate background music).
Step 5. Press * to exit programming.
Note that you can return a key to its default setting by entering code 000 in Step 4.
Operation
Refer to the Panther II Feature Module II User Guide for details on how to use the pro-
grammable keys.
Operating Notes
The indicator Iamps beside keys that have been programmed as features won' t indicate
the status of the feature. For example, when the Relay Control ON key is pressed the
relay is activated, but the indicator lamp beside the Relay Control ON key doesn' t turn
on.
Before you can use a ReIay Control ON key or a Relay Control OFF key, the system
must be programmed for Relay Control and for either Automatic or Manual Relay
Conrrof. If the system is programmed so that the relay automatically returns to off
(default setting), then obviously you won' t require a Relay Control OFF key. Refer to
the Programming Practice in the Panther II System Manual for instructions on how to
program these parameters.
Relay Control ON/OFF keys only work at stations that have been programmed for
Relay Access. The Master Attendant Station is the only station preprogrammed with
Relay Access.
Before you can use the Executive Override key at a set, the set must be programmed
with Executive Override capability.
A music source must be connected to the KSU before a Background Music key can be
used to activate background music.
' .
Feature Module II & Options Interface Hardware
Page 6