Configure Vlan Add Multilink - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

T1, E1, and T3 WAN Commands

configure vlan add multilink

configure vlan <vlan name> add multilink <groupname>

Adds an MLPPP multilink group to a VLAN

Syntax Description

Usage Guidelines

Add an MLPPP group to a VLAN to transport traffic across the link. A multilink group configured for

BCP encapsulation can transport more than one VLAN's traffic (see "configure ppp user" on page 1714

for details).

The following command adds the multilink group marmots to the VLAN corporate:

configure corporate add ml_remote

This command was first available in ExtremeWare v6.1.5w2.01WAN technology release.

This command was subsequently incorporated into ExtremeWare 7.0.0.

Platform Availability

This command is available on the Alpine 3800 series platform, when a WAN module is installed.

Specifies a previously created VLAN.

Specifies a previously created multilink group.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0