Show Mpls Health-Check Vplsping - Extreme Networks ExtremeWare Command Reference Manual

show mpls health-check vplsping

show mpls health-check vplsping {detail | <vpls_name> {peer <ipaddress> |
mac-address <macaddress>}} {detail}
Description
Displays the configuration and status for VPLS health-checks.
Syntax Description
vpls_name
detail
ipaddress
macaddress
Default
N/A.
Usage Guidelines
This command displays the configuration and status for VPLS health-checks. If no optional keywords
are specified, information is displayed in tabular format for all configured VPLS health-checks.
Optionally, if the
vpls are displayed. Health-check information displayed includes the type of health-check, current status,
and relevant configuration parameters. If the optional
information is displayed in a comprehensive detail format. The detail format includes total state
transition count from up to down and down to up, time of last failure, total up time, and total down
time, and error code (if applicable). The
further restrict the vplsping information displayed for the vpls_name. Information displayed for a
specific ipaddress or macaddress is always displayed in the detailed format.
Example
Needed
History
This command was first available in an ExtremeWare 7.3.
Platform Availability
This command is available on the BlackDiamond switch.
ExtremeWare Software 7.3.0 Command Reference Guide
Displays only health-checks associated with the specified vpls.
Displays the health-check information in comprehensive detail format.
Restricts the vplsping information as specified.
Restricts the vplsping information as specified.
parameter is specified, only the health-checks associated with the specified
vpls_name
optional
keyword is specified, the health-check
detail
peer and keywords may be specified to
mac-address
show mpls health-check vplsping
1831