Configure Pim Crp Vlan Access Profile - Extreme Networks ExtremeWare Command Reference Manual

configure pim crp vlan access profile

configure pim crp vlan <vlan name> [none | <access profile>] {<priority>}
Description
Configures the dynamic candidate rendezvous point for PIM sparse-mode operation.
Syntax Description
vlan name
none
access profile
priority
Default
The default setting is for priority is 0 and indicates the highest priority.
Usage Guidelines
The access profile contains the list of multicast group accesses serviced by this RP. To delete a CRP, use
the keyword none as the access policy.
The VLAN specified for CRP must have IPMC forwarding enabled for PIM sparse mode.
Example
The following command configures the candidate rendezvous point for PIM sparse-mode operation on
the VLAN HQ_10_0_3 with the access profile rp-list and priority set to 30:
configure pim crp HQ_10_0_3 rp-list 30
History
This command was available in ExtremeWare 6.2.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies a VLAN name.
Specifies no access profile.
Specifies an access profile name.
Specifies a priority setting. The range is 0 - 254.
configure pim crp vlan access profile
1511