Configure Ipxsap Add Vlan - Extreme Networks ExtremeWare Command Reference Manual

configure ipxsap add vlan

configure ipxsap add vlan [<vlan name> | all]
Description
Configures an IPX VLAN to run IPX/SAP routing.
Syntax Description
vlan name
all
Default
N/A.
Usage Guidelines
If no VLAN is specified, all VLANs are configured to run IPX/SAP routing. IPX/SAP routing is enabled
by default when the IPX VLAN is configured.
Example
The following command configures the IPX VLAN
configure ipxsap add vlan accounting
History
This command was introduced in ExtremeWare 4.0.
Platform Availability
This command is available on the all "i" series systems.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies a VLAN name.
Specifies all VLANs.
accounting
configure ipxsap add vlan
to run IPX/SAP routing:
1569