Configure Ports T1 Linecoding - Extreme Networks ExtremeWare Command Reference Manual

configure ports t1 linecoding

configure ports <portlist> t1 linecoding [b8zs | ami]
Description
Configures the linecoding convention for T1 links.
Syntax Description
portlist
b8zs
ami
Default
The default linecoding is B8ZS.
Usage Guidelines
The two choices for linecoding standards are bipolar eight zero suppression (B8ZS) or alternate mark
inversion (AMI).
Example
The following command sets the linecoding to AMI:
configure ports 2:3,2:4 t1 linecoding ami
History
This command was first available in ExtremeWare v6.1.5w2.01WAN technology release.
This command was subsequently incorporated into ExtremeWare 7.0.0.
Platform Availability
This command is available on the Alpine 3800 series platform, when a WAN module is installed.
ExtremeWare Software 7.3.0 Command Reference Guide
A list of ports.
Specifies B8ZS linecoding.
Specifies AMI linecoding.
configure ports t1 linecoding
1707