Extreme Networks ExtremeWare Command Reference Manual page 1475

Example
The following command displays information about a specified neighbor:
show bgp neighbor 10.10.10.10
Following is the output from this command:
IBGP Peer: 10.10.10.10
ConnectRetry: 120
Source Interface: Not configured
NextHopSelf: Enabled Send Communities: No Soft Input Reconfiguration: Disabled
Max-Prefix: 100000 Threshold: 75 Teardown: Yes(HoldInt: 300) SendTraps: No
Remove Private AS : No
IN NLRI Filter
OUT NLRI Filter
IN AS-Path Filter
OUT AS-Path Filter : None
IN ROUTE-MAP
OUT ROUTE-MAP
State: IDLE(Reached maximum prefix limit)
RemoteAddr:10.10.10.10:179 LocalAddr:10.10.10.51:1024 PeerRtrId:0.0.0.0
InUpdates: 26549
InUpdateElapsedTime: 0:0:00:20
HoldTime: 180
FSM Down since: Mon Apr 1 15:59:42 2002 (Duration: 0:0:00:17)
LastErr: 0/0
History
This command was available in ExtremeWare 6.1.
This command was modified in ExtremeWare 6.2.2 to include information about maximum prefix
settings.
This command was modified in ExtremeWare 7.0.0 to show flap statistics and suppressed routes for
BGP route flap dampening.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
As: 14490 Enabled: Yes
HoldTimeCfg: 180
RRClient: No
: None
: None
: None
: None
: None
OutUpdates(InQ): 0(0)
InMsgElapsedTime: 0:0:00:20
KeepAlive: 60 FsmTransitions: 1
Router: Enabled
KeepaliveCfg: 60 MinAsOrig:15
EBGP-Multihop: No
InTotalMsgs: 26559
RestartAfter: 0:04:43
show bgp neighbor
Weight: 1
OutTotalMsgs: 9
InPrefix: 0
1475