Extreme Networks ExtremeWare Command Reference Manual page 2216

Troubleshooting Commands
Usage Guidelines
Use this command to display the debug trace level configured for a particular system, and VLAN. Some
of the debug trace systems commands can be applied to a particular VLAN, some apply to the switch as
a whole, so the option is not available with all systems.
vlan
Example
The following command displays the debug trace levels configured:
show debug-trace
Following is the output from this command:
OSPF SPF
Flowstats
Vlan
---------------------------------------------------------------------------
v49
Port Number
---------------------------------------------------------------------------
No port-based debug-tracing configured
History
This command was first available in ExtremeWare 6.1.
Beginning in ExtremeWare 7.1.0, many debug trace facilities were moved to EMS.
Platform Availability
This command is available on all platforms.
2216
3
3
Debug
DVMRP route
Debug
Level
3
Level
ExtremeWare Software 7.3.0 Command Reference Guide