Configure Bgp Peer-Group Nlri-Filter - Extreme Networks ExtremeWare Command Reference Manual

configure bgp peer-group nlri-filter

configure bgp peer-group <peer group> nlri-filter [in | out] [none |
<access profile>]
Description
Configures the NLRI filter for a peer group and all the neighbors of the peer group.
Syntax Description
peer group
in
out
none
access profile
Default
N/A.
Usage Guidelines
None.
Example
The following command configures the NLRI filter for the peer group outer and its neighbors using the
access profile nosales:
configure bgp peer-group outer nlri-filter in nosales
History
This command was available in ExtremeWare 6.1.5.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies a peer group.
Specifies to install the filter on the input side.
Specifies to install the filter on the output side.
Specifies to remove the filter.
Specifies an access profile.
configure bgp peer-group nlri-filter
1433