Enable Bgp Neighbor Soft-In-Reset - Extreme Networks ExtremeWare Command Reference Manual

Hide thumbs Also See for ExtremeWare:

Table of Contents

BGP Commands

enable bgp neighbor soft-in-reset

enable bgp neighbor [all | <ip address>] soft-in-reset

Enables the soft input reset feature.

Syntax Description

Usage Guidelines

Disabling the soft input reset feature can potentially limit the amount of system memory consumed by

The following command enables the soft recognition feature:

enable bgp neighbor 192.168.1.17 soft-in-reset

This command was available in ExtremeWare 6.2.

Platform Availability

This command is available on all platforms.

Specifies all neighbors.

Specifies an IP address.

ExtremeWare Software 7.3.0 Command Reference Guide

Extremeware 7.3.0