Configure Bgp Neighbor Nlri-Filter - Extreme Networks ExtremeWare Command Reference Manual

configure bgp neighbor nlri-filter

configure bgp neighbor [<ip address> | all] nlri-filter [in | out] [none |
<access profile>]
Description
Configures an NLRI filter for a neighbor.
Syntax Description
ip address
all
in
out
none
access profile
Default
N/A.
Usage Guidelines
The NLRI filter is defined using the access-profile mechanism and can be installed on the input side
and/or the output side of the router.
Example
The following command configures the NLRI filter for a neighbor based on the access profile nosales:
configure bgp neighbor 192.1.1.22 nlri-filter in nosales
History
This command was first available in ExtremeWare 6.1.
Platform Availability
This command is available on all platforms.
ExtremeWare Software 7.3.0 Command Reference Guide
Specifies a BGP neighbor IP address.
Specifies all neighbors.
Specifies to install the filter on the input side.
Specifies to install the filter on the output side.
Specifies to remove the filter.
Specifies an access profile.
configure bgp neighbor nlri-filter
1415