Extreme Networks ExtremeWare Command Reference Manual page 1891

Hide thumbs Also See for ExtremeWare:

Table of Contents

• High Priority Bytes—Sum, per ingress queue, of the bytes forwarded for received high-priority

• Low Priority Bytes—Sum, per ingress queue, of the bytes forwarded for received low-priority

• Total Percent Dropped—Percentage of incoming bytes on this queue dropped due to

oversubscription congestion. This is determined using cumulative counters, so is not a rate. This will

be displayed with a precision of 1%.

• Byte Rates—The following three rate values will always either add up to 0% or 100%:

— High Priority Percentage—The ratio of high priority traffic forwarded on this queue to the total

bytes received on this queue.

— Low Priority Percentage—The ratio of low priority traffic forwarded on this queue to the total

bytes received on this queue.

— Dropped Percentage—Percentage of receive bytes dropped by this queue relative to the total

number of bytes input to this queue.

The following command displays real-time ingress statistics for slot 1, port 1:

show ports 1:1 ingress stats

Following is sample output from this command:

Port Statistics

================================================================================

The following command displays real-time ingress statistics for slot 1, port 1 and per ingress queue:

show ports 1:1 ingress stats detail

Following is sample output from this command:

Port Statistics

================================================================================

=======================================================================

ExtremeWare Software 7.3.0 Command Reference Guide

Total % |---------- RATES -----------|

show ports ingress stats

Thu Jul 10 08:24:50 2003

Thu Jul 10 08:24:50 2003

Extremeware 7.3.0